 |
Concrete Waterproofing and Crack Repair Krystolize Your ConcreteTM
KrystolTM Concrete Waterproofing: It's the intelligent, self-sealing water-protection system that transforms concrete into a powerful water-resistant barrier. Krystol relies on a revolutionary hydrophilic crystalline technology that turns porous concrete into an impermeable barrier. The result is a structure with reduced cracking, self-sealing and water-resistant abilities that provide a powerful defense against water damage and corrosion of reinforcing steel. So whether it's new construction, upgrading an existing structure or repairing cracks, Krystol will help you build the quality, reliability and cost-effectiveness into the concrete. |
| |
|
|
|
|
KIM™ (K-300, 301)
Tech. Data Sheet |
|
KIM is the world's only permanent, self-sealing, corrosion-free, concrete waterproofer. KIM is a chemical admixture used for the treatment of concrete and concrete products to protect against water intrusion, leakage, cracking, chemical attack, and corrosion of reinforcing steel. KIM is a more reliable and cost-effective alternative to traditional waterproofing membranes because KIM turns the concrete itself into the membrane. |
| |
|
|
|
| |
Krystol™ T1 & T2
Tech. Data Sheet |
|
Waterproofing System is a cementitious, brush-applied, treatment for concrete. KRYSTOL T1 & T2 contain the proven world-renowned Krystol waterproofing chemicals. Krystol T1 is applied to the concrete first followed by KRYSTOL T2. When applied in accordance with manufacturer's specifications, the Krystol system is warranted for use in place of conventional
waterproofing systems. KRYSTOL T1 & T2 react chemically within the concrete mass to form billions of needle-like crystals which block the pores, voids and microcracks in concrete. Presaturation and subsequent re-wetting of the surface will cause deeper diffusion of the organic chemicals and formation of crystals at greater depth. |
| |
|
|
|
| |
Krystol™ Plug (K-620)
Tech. Data Sheet |
|
KRYSTOL PLUG is a powder that, when mixed to a stiff-dough consistency with water, may be used to immediately arrest the seepage or flow of water through concrete cracks. Within two minutes, Krystol Plug sets to a completely waterproof seal and continues to harden until its strength exceeds that of the concrete onto which it has been applied. |
| |
|
|
|
| |
Krystol Baricote (K-315)
Tech. Data Sheet |
|
Krystol Baricote is a fast-setting waterproof grout that is specially designed to repair leaking cracks, holes and joints in concrete as outlined in Technical Bulletins 101 & 102. Krystol Baricote contains special ingredients that react chemically with concrete to form millions of needle shaped hydration crystals. These crystals grow deep into the capillary pores of the grout and surrounding concrete to block the passage of water. |
| |
|
|
|
 |
Hydrostop (K-770)
Tech. Data Sheet |
|
HYDROSTOPTM is a state of the art water-repellent sealer specifically designed for concrete, brick and masonry. HYDROSTOPTM works better and lasts much longer than conventional sealers because it contains a unique blend of silane and siloxane compounds which chemically react with silicates below the surface of the substrate. This reaction forms an insoluble, water-repellent barrier within the surface that cannot wear away, fade, yellow, crack or peel. The finished application is virtually invisible, leaving the surface with its original appearance and breathability. |
| |
|
|
|
| |
|
|
 
A NRMCA site © National Ready Mixed Concrete Association, 2006
|